Member Bondarchuk Posted January 9, 2015 Member Report Share Posted January 9, 2015 Всем привет друзья! Не так давно сделал вот такую модель Делал ее под заказ и как оказалось, необходимо было объединить все объекты в один меш, что бы у данного грузовика было всего две текстуры, одна на сам автомобиль, а вторая на прозрачные объекты - на стекла. Объединил в максе все объекты, развернул модель и через applink Отправил в 3D Coat для рисованию по UV. Когда модель загружается получается такая хня В максе модель отображается нормально, геометрия в порядке. Получается именно с этой моделью( Работаю уже над другим проектом, и переделывать этот заново не очень хочется. Помогите пожалуйста, в чем может быть причина? Quote Link to comment Share on other sites More sharing options...
Carlosan Posted January 9, 2015 Report Share Posted January 9, 2015 original model nomals are ok ? оригинальная модельnomals в порядке ? Quote Link to comment Share on other sites More sharing options...
Member Bondarchuk Posted January 9, 2015 Author Member Report Share Posted January 9, 2015 original model nomals are ok ? оригинальная модельnomals в порядке ? Модель была готова к экспорту в игру. Модель оригинальная The model was ready for export to the game. original model Quote Link to comment Share on other sites More sharing options...
Member Bondarchuk Posted January 9, 2015 Author Member Report Share Posted January 9, 2015 original model nomals are ok ? оригинальная модельnomals в порядке ? Вот Рендер в 3DMax Quote Link to comment Share on other sites More sharing options...
Carlosan Posted January 9, 2015 Report Share Posted January 9, 2015 Are you using autosmooth option ? 4.1.17D is the last upgrade, if you like to try could you share the obj ? Quote Link to comment Share on other sites More sharing options...
Member Bondarchuk Posted January 9, 2015 Author Member Report Share Posted January 9, 2015 (edited) AutoSmooth on.jpg Are you using autosmooth option ? 4.1.17D is the last upgrade, if you like to try could you share the obj ? I tried to apply smoothing, and tried without it. Here the it turns out that the model is transferred into program in the form of primitive boxes. Share the model unfortunately I can not, because the model is done for commercial purposes. I do not think that the case in the new version, because before that I worked with this model, but now when you export that's what happens. Other models have no such problems, and I do not understand the reason why this is so Edited January 9, 2015 by Bondarchuk Quote Link to comment Share on other sites More sharing options...
Member Bondarchuk Posted January 9, 2015 Author Member Report Share Posted January 9, 2015 AutoSmooth on.jpg Are you using autosmooth option ? 4.1.17D is the last upgrade, if you like to try could you share the obj ? I have tried to separate from this model one box. Here's what happens: Quote Link to comment Share on other sites More sharing options...
Carlosan Posted January 9, 2015 Report Share Posted January 9, 2015 Please send support question to Andrew Shpagin at support@3d-coat.com ty Quote Link to comment Share on other sites More sharing options...
Member Bondarchuk Posted January 9, 2015 Author Member Report Share Posted January 9, 2015 Please send support question to Andrew Shpagin at support@3d-coat.com ty Thank you so I will do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.